Loanproductsconfiguration
Represents the loan products configuration.
loanProducts object[]
The list of all loan products.
accountLinkSettings object
Represents the settings for linking a deposit account.
TRUE if the loan accounts created using this loan product can be linked to a deposit account, FALSE otherwise.
If defined, loan accounts created for this loan product can only be linked to deposit accounts that use the deposit product with this ID. If null, the loan accounts for this loan product can be linked to any deposit account.
A set of linked account options.
Possible values: [AUTO_LINK_ACCOUNTS, AUTO_CREATE_LINKED_ACCOUNTS]
The type of of automated transfer that should be made from linked deposit accounts into loan accounts created from this loan product.
Possible values: [FULL_DUE_AMOUNTS, PARTIAL_DUE_AMOUNTS, NO_AUTOMATED_TRANSFERS]
accountingSettings object
Accounting settings, defines the accounting settings for the product
The calculation method used for accounting.
Possible values: [NONE, CASH, ACCRUAL]
accountingRules object[]
A list of accounting rules for the product.
General ledger financial resource used to setup the product accounting rules and determine the credit and debit accounts when logging journal entries.
Possible values: [PORTFOLIO_CONTROL, FUND_SOURCE, WRITE_OFF_EXPENSE, INTEREST_INCOME, PAYMENT_HOLIDAY_INTEREST_INCOME, TAXES_PAYABLE, FEE_INCOME, PENALTY_INCOME, NEGATIVE_INTEREST_PAYABLE_RECEIVABLE, NEGATIVE_INTEREST_PAYABLE, INTEREST_RECEIVABLE, PAYMENT_HOLIDAY_INTEREST_RECEIVABLE, FEE_RECEIVABLE, PENALTY_RECEIVABLE, TAXES_RECEIVABLE, DEFERRED_INTERESTS_INCOME, DEFERRED_FEE_INCOME, DEFERRED_TAXES, DEPOSIT_REFERENCE, SAVINGS_CONTROL, INTEREST_EXPENSE, INTEREST_PAYABLE, NEGATIVE_INTEREST_INCOME, NEGATIVE_INTEREST_RECEIVABLE, OVERDRAFT_PORTFOLIO_CONTROL, OVERDRAFT_INTEREST_INCOME, OVERDRAFT_WRITE_OFF_EXPENSE, OVERDRAFT_INTEREST_RECEIVABLE, INTER_BRANCH_TRANSFER, INTEREST_FROM_ARREARS_INCOME, INTEREST_FROM_ARREARS_RECEIVABLE, INTEREST_FROM_ARREARS_WRITE_OFF_EXPENSE, PROFIT_EXPENSE, PROFIT_PAYABLE, MUDARIB_SHARE, DISTRIBUTABLE_PROFIT, INTEREST_FROM_FEES_INCOME, INTEREST_FROM_FEES_RECEIVABLE, INTEREST_FROM_FEES_WRITE_OFF_EXPENSE, CREDIT_BALANCE_PAYABLE]
The unique identifier of the account that is mapped to the financial resource.
The key of the transaction rule that uses this rule
The accounting interest calculation option selected for the product.
Possible values: [NONE, AGGREGATED_AMOUNT, BREAKDOWN_PER_ACCOUNT]
The interval defined for a product when the interest accrues should be maintained.
Possible values: [NONE, DAILY, END_OF_MONTH]
TRUE if an additional payment may be allocated on the account, ignoring the default repayment allocation order, FALSE otherwise.
arrearsSettings object
Represents a grouping of all arrears settings.
The arrears date calculation method.
Possible values: [ACCOUNT_FIRST_WENT_TO_ARREARS, LAST_LATE_REPAYMENT, ACCOUNT_FIRST_BREACHED_MATERIALITY_THRESHOLD]
Defines the tolerance monthly date
Shows whether the non working days are taken in consideration or not when applying penaltees/late fees or when setting an account into arrears
Possible values: [INCLUDED, EXCLUDED]
Defines the tolerance calculation method
Possible values: [ARREARS_TOLERANCE_PERIOD, MONTHLY_ARREARS_TOLERANCE_DAY]
The tolerance floor amount.
tolerancePercentageOfOutstandingPrincipal object
Used for keeping decimal constraints.
The default value, will be used in case no other value was filled in by the user.
The maximum value.
The minimum value.
tolerancePeriod object
Decimal integer, like min/max/default.
The default value, will be used in case no other value was filled in by the user.
The maximum value.
The minimum value.
availabilitySettings object
Holds information about product availability.
Holds the entities this product is available for. i.e Individuals
Possible values: [INDIVIDUALS, PURE_GROUPS, SOLIDARITY_GROUPS]
branchSettings object
Holds information about branch availability for the product.
Indicates if this product should be available for all branches
Holds the ids of the branches this product should be available for.
Shows the available loan product categories
Possible values: [PERSONAL_LENDING, PURCHASE_FINANCING, RETAIL_MORTGAGES, SME_LENDING, COMMERCIAL, UNCATEGORIZED]
creditArrangementSettings object
The funding settings, holds the settings regarding the funding for the loan product.
Shows whether accounts created after this product can/should be part of a line of credit.
Possible values: [OPTIONAL, REQUIRED, NOT_REQUIRED]
currency object
Represents a currency eg. USD, EUR.
Currency codes according to ISO-4217 currency codes
Possible values: [AED, AFN, ALL, AMD, ANG, AOA, ARS, AUD, AWG, AZN, BAM, BBD, BDT, BGN, BHD, BIF, BMD, BND, BOB, BOV, BRL, BSD, BTN, BWP, BYR, BYN, BZD, CAD, CDF, CHE, CHF, CHW, CLF, CLP, CNY, COP, COU, CRC, CUC, CUP, CVE, CZK, DJF, DKK, DOP, DZD, EGP, ERN, ETB, EUR, FJD, FKP, GBP, GEL, GHS, GIP, GMD, GNF, GTQ, GYD, HKD, HNL, HRK, HTG, HUF, IDR, ILS, INR, IQD, IRR, ISK, JMD, JOD, JPY, KES, KGS, KHR, KMF, KPW, KRW, KWD, KYD, KZT, LAK, LBP, LKR, LRD, LSL, LTL, LVL, LYD, MAD, MDL, MGA, MKD, MMK, MNT, MOP, MRO, MRU, MUR, MVR, MWK, MXN, MXV, MYR, MZN, NAD, NGN, NIO, NOK, NPR, NZD, OMR, PAB, PEN, PGK, PHP, PKR, PLN, PYG, QAR, RON, RSD, RUB, RWF, SAR, SBD, SCR, SDG, SEK, SGD, SHP, SLL, SLE, SOS, SRD, STD, STN, SVC, SYP, SZL, THB, TJS, TMT, TND, TOP, TRY, TTD, TWD, TZS, UAH, UGX, USD, USN, UYI, UYU, UYW, UZS, VED, VEF, VES, VND, VUV, WST, XAF, XAG, XAU, XBA, XBB, XBC, XBD, XCD, XCG, XDR, XOF, XPD, XPF, XPT, XSU, XTS, XUA, XXX, YER, ZAR, ZIG, ZWG, ZMK, ZWL, ZMW, SSP]
feeSettings object
Defines the fee settings for loan product.
Indicates if arbitrary fees will be allowed.
fees object[]
List of all fees that can be applied for accounts of this loan product.
accountingRules object[]
A list of accounting rules defined for this fee.
General ledger financial resource used to setup the product accounting rules and determine the credit and debit accounts when logging journal entries.
Possible values: [PORTFOLIO_CONTROL, FUND_SOURCE, WRITE_OFF_EXPENSE, INTEREST_INCOME, PAYMENT_HOLIDAY_INTEREST_INCOME, TAXES_PAYABLE, FEE_INCOME, PENALTY_INCOME, NEGATIVE_INTEREST_PAYABLE_RECEIVABLE, NEGATIVE_INTEREST_PAYABLE, INTEREST_RECEIVABLE, PAYMENT_HOLIDAY_INTEREST_RECEIVABLE, FEE_RECEIVABLE, PENALTY_RECEIVABLE, TAXES_RECEIVABLE, DEFERRED_INTERESTS_INCOME, DEFERRED_FEE_INCOME, DEFERRED_TAXES, DEPOSIT_REFERENCE, SAVINGS_CONTROL, INTEREST_EXPENSE, INTEREST_PAYABLE, NEGATIVE_INTEREST_INCOME, NEGATIVE_INTEREST_RECEIVABLE, OVERDRAFT_PORTFOLIO_CONTROL, OVERDRAFT_INTEREST_INCOME, OVERDRAFT_WRITE_OFF_EXPENSE, OVERDRAFT_INTEREST_RECEIVABLE, INTER_BRANCH_TRANSFER, INTEREST_FROM_ARREARS_INCOME, INTEREST_FROM_ARREARS_RECEIVABLE, INTEREST_FROM_ARREARS_WRITE_OFF_EXPENSE, PROFIT_EXPENSE, PROFIT_PAYABLE, MUDARIB_SHARE, DISTRIBUTABLE_PROFIT, INTEREST_FROM_FEES_INCOME, INTEREST_FROM_FEES_RECEIVABLE, INTEREST_FROM_FEES_WRITE_OFF_EXPENSE, CREDIT_BALANCE_PAYABLE]
The unique identifier of the account that is mapped to the financial resource.
The key of the transaction rule that uses this rule
amortizationSettings object
The settings for defining period intervals.
Type of amortization profile used for fee
Possible values: [NONE, SUM_OF_YEARS_DIGITS, STRAIGHT_LINE, EFFECTIVE_INTEREST_RATE]
Flag for signaling if fee amortization should be continued or finished at account reschedule
Possible values: [END_AMORTIZATION_ON_THE_ORIGINAL_ACCOUNT, CONTINUE_AMORTIZATION_ON_THE_RESCHEDULED_REFINANCED_ACCOUNT]
Frequency settings of the fee amortization
Possible values: [ACCOUNT_INSTALLMENTS_DUE_DATES, ACCOUNT_INSTALLMENTS_DUE_DATES_DAILY_BOOKING, CUSTOM_INTERVAL]
Total number of intervals
Defines the options for an interval
Possible values: [PREDEFINED_INTERVALS, FULL_TERM]
Period count used in conjunction with periodUnit to determine the next date of the interval
Amortization unit to determine the interval between amortizations
Possible values: [DAYS, WEEKS, MONTHS, YEARS]
The amount of the fee.
External function
Defines the fee amount calculation method of loan product
Possible values: [FLAT, LOAN_AMOUNT_PERCENTAGE, REPAYMENT_PRINCIPAL_AMOUNT_PERCENTAGE, LOAN_AMOUNT_PERCENTAGE_NUMBER_OF_INSTALLMENTS, FLAT_NUMBER_OF_INSTALLMENTS, IOF_PERCENTAGE_OF_DISBURSED_AMOUNT, IOF_PERCENTAGE_OF_INSTALLMENT_PRINCIPAL, IOF_PERCENTAGE_OF_LATE_INSTALLMENT_PRINCIPAL, MAMBU_FUNCTION, FEE_RATE_ON_OUTSTANDING_PRINCIPAL]
The fee application type of loan product
Possible values: [REQUIRED, OPTIONAL]
The id of the fee.
The name of the fee.
The amount of the fee in percents applied to percentSource
The current fee state of loan product
Possible values: [ACTIVE, INACTIVE]
taxSettings object
Defines settings for taxes on the loan product
Defines method used by the loans to compute the taxes for the revenues
Possible values: [DEFAULT, NON_TAXABLE, CUSTOM_TAX]
The event that will trigger a fee.
Possible values: [MANUAL, MANUAL_PLANNED, DISBURSEMENT, CAPITALIZED_DISBURSEMENT, UPFRONT_DISBURSEMENT, LATE_REPAYMENT, PAYMENT_DUE, PAYMENT_DUE_APPLIED_ON_DUE_DATES, ARBITRARY, IOF, EARLY_REPAYMENT_CHARGE, FEE_INCLUDED_IN_PMT]
fundingSettings object
The funding settings, holds the settings regarding the funding for the loan product.
Indicates whether the product has the investor funds enabled or not.
funderInterestCommission object
Used for keeping decimal constraints.
The default value, will be used in case no other value was filled in by the user.
The maximum value.
The minimum value.
Define how the Interest is allocated to the investors(if the investors can define their own percentages for their own contribution to the loan, or if all of them are using the same percentage).
Possible values: [PERCENTAGE_OF_LOAN_FUNDING, FIXED_INTEREST_COMMISSIONS]
Shows whether investor funds are locked or not at the loan account's approval.
organizationInterestCommission object
Used for keeping decimal constraints.
The default value, will be used in case no other value was filled in by the user.
The maximum value.
The minimum value.
The required investor funds percentage, for opening an account with external funding. If null, the investor funds are not enabled.
gracePeriodSettings object
The funding settings, holds the settings regarding the funding for the loan product.
gracePeriod object
Decimal integer, like min/max/default.
The default value, will be used in case no other value was filled in by the user.
The encoded key of the integer constraint, auto generated, unique
The maximum value.
The minimum value.
The grace period type for a loan account.
Possible values: [NONE, PAY_INTEREST_ONLY, INTEREST_FORGIVENESS]
The ID of the loan product, which must be globally unique.
interestSettings object
The interest settings, defines constraints regarding interest that will be used on the loan account crated based on this product.
Whether late interest should be accrued, applied and paid
The frequency on which the accrued interest will be added to the principal for interest calculation.
Possible values: [DAILY, SEMI_ANNUALLY]
Shows how many days in a year should be used for loan calculations.
Possible values: [ACTUAL_365_FIXED, ACTUAL_364, ACTUAL_360, ACTUAL_ACTUAL_ISDA, E30_360, BUS_252, E30_42_365]
indexRateSettings object
The interest settings, defines constraints regarding interest that will be used on the loan account created based on this product.
If the product supports this option, specify if the interest should be accrued after the account maturity date
Indicator whether the loan product allows negative values for interest rate or interest spread
Id of index source.
The interest change frequency method for a loan account. Shows the possible methods for obtaining the balance based on which the interest will be calculated for loan repayment.
Possible values: [ANNUALIZED, EVERY_MONTH, EVERY_FOUR_WEEKS, EVERY_WEEK, EVERY_DAY, EVERY_X_DAYS]
the count of units to apply over the interval
interestRate object
Used for keeping decimal constraints.
The default value, will be used in case no other value was filled in by the user.
The maximum value.
The minimum value.
Interest spread + index interest rate can't be more than this amount (valid only for index interest rate products).
Interest spread + index interest rate can't be less than this amount (valid only for index interest rate products).
Interest rate review frequency unit count
The interest rate review unit values. Shows how often is index interest rate reviewed.
Possible values: [DAYS, WEEKS, MONTHS]
The interest rate review unit values. Shows how often is index interest rate reviewed.
Possible values: [FIXED_INTEREST_RATE, INDEX_INTEREST_RATE]
Defines the option of how is the interest rate determined when being accrued for an account.
Possible values: [FIXED, TIERED, TIERED_PERIOD, TIERED_BAND]
interestRateTiers object[]
The list of interest rate tiers available for the current settings instance
The top-limit value for the account balance in order to determine if this tier is used or not
The rate used for computing the interest for an account which has the balance less than the ending balance
The interest application method for a loan account. It shows the method used by the loans defining how the interest gets applied.
Possible values: [AFTER_DISBURSEMENT, REPAYMENT_DUE_DATE, FIXED_DAYS_OF_MONTH]
The interest balance calculation method for a loan account. Shows the possible methods for obtaining the balance based on which the interest will be calculated for loan repayment.
Possible values: [ONLY_PRINCIPAL, PRINCIPAL_AND_INTEREST, PRINCIPAL_AND_FEE, PRINCIPAL_INTEREST_AND_FEE]
The interest calculation method for a loan account. Shows the different interest calculation methods.
Possible values: [FLAT, DECLINING_BALANCE, DECLINING_BALANCE_DISCOUNTED, EQUAL_INSTALLMENTS]
interestRateSettings object[]
Adjustable interest rates settings
Index rate source id.
interestRate object
Used for keeping decimal constraints.
The default value, will be used in case no other value was filled in by the user.
The maximum value.
The minimum value.
Maximum value allowed for index based interest rate. Valid only for index interest rate.
Minimum value allowed for index based interest rate. Valid only for index interest rate.
Interest rate review frequency unit count. Valid only for index interest rate.
The interest rate review unit values. Shows how often is index interest rate reviewed.
Possible values: [DAYS, WEEKS, MONTHS]
The interest rate review unit values. Shows how often is index interest rate reviewed.
Possible values: [FIXED_INTEREST_RATE, INDEX_INTEREST_RATE]
Shows the possible values for how we compute and apply the interest.
Possible values: [SIMPLE_INTEREST, CAPITALIZED_INTEREST, COMPOUNDING_INTEREST]
pmtAdjustmentThreshold object
Represents PMT Adjustment threshold settings for loan accounts and loan products.
Represents the method used to calculate the PMT adjustment threshold. Supported value is CALENDAR_DAYS
Possible values: [WORKING_DAYS, CALENDAR_DAYS]
The number of days that trigger a PMT Adjustment.
Methods that determine how the number of interest days for a repayment are computed.
Possible values: [REPAYMENT_PERIODICITY, ACTUAL_DAYS_COUNT]
internalControls object
Constraints and automated actions and that will be applied on the accounts.
Specifies the number of days for an account to be fully paid in order to auto close it.
fourEyesPrinciple object
Settings for Four Eyes Principle
Requires separate users to create and approve loan accounts
lockSettings object
Settings applied when transitioning accounts to Locked state
Specifies constraint types for capping charges.
Possible values: [SOFT_CAP, HARD_CAP]
Specifies how principal will be used when calculating capping charges.
Possible values: [OUTSTANDING_PRINCIPAL_PERCENTAGE, ORIGINAL_PRINCIPAL_PERCENTAGE]
Specifies the percentage of principal that cannot be exceeded by the sum of interest, fees and penalty balances.
Specifies the number of days for in which the account will be locked if it stays in arrears.
loanAmountSettings object
The amount settings, holds all amount properties.
loanAmount object
Used for keeping decimal constraints.
The default value, will be used in case no other value was filled in by the user.
The maximum value.
The minimum value.
trancheSettings object
Represents the loan product tranche settings.
The number of tranches supported by the loan product.
The name of the loan product.
newAccountSettings object
The new account settings, defines the settings and constraints used by new loan account created based on this product.
All the generic account states applicable to loans.
Possible values: [PARTIAL_APPLICATION, PENDING_APPROVAL, APPROVED, ACTIVE, ACTIVE_IN_ARREARS, CLOSED]
All the generic account states applicable to loans.
Possible values: [INCREMENTAL_NUMBER, RANDOM_PATTERN]
The pattern that will be used for ID validation (as referred to as an input mask).
The notes or description of the loan product.
offsetSettings object
The offset settings, holds information about offset.
Indicates whether the product supports offset
paymentSettings object
Model representation of the payment settings configuration
Payments Method used by loan accounts for repayments schedule generation.
Possible values: [STANDARD_PAYMENTS, BALLOON_PAYMENTS, OPTIMIZED_PAYMENTS, PAYMENT_PLAN]
The late payment recalculation method. Is used by loan accounts to have the schedule recalculated when late payments are posted on accounts.
Possible values: [OVERDUE_INSTALLMENTS_INCREASE, LAST_INSTALLMENT_INCREASE, NO_RECALCULATION]
The payment allocation method used by the loans defining how the payments get performed.
Possible values: [HORIZONTAL, VERTICAL]
prepaymentSettings object
The prepayment settings, holds all prepayment properties.
The apply interest method type for pre-payments.
Possible values: [AUTOMATIC, MANUAL]
The elements recalculation method types
Possible values: [PRINCIPAL_EXPECTED_FIXED, TOTAL_EXPECTED_FIXED]
ERC free allowance in percentage
Future payments allowance types.
Possible values: [NO_FUTURE_PAYMENTS, ACCEPT_FUTURE_PAYMENTS, ACCEPT_OVERPAYMENTS]
Pre-payment acceptance types.
Possible values: [ACCEPT_PREPAYMENTS, NO_PREPAYMENTS]
The prepayment recalculation method types.
Possible values: [NO_RECALCULATION, RESCHEDULE_REMAINING_REPAYMENTS, RECALCULATE_SCHEDULE_KEEP_SAME_NUMBER_OF_TERMS, RECALCULATE_SCHEDULE_KEEP_SAME_PRINCIPAL_AMOUNT, RECALCULATE_SCHEDULE_KEEP_SAME_TOTAL_REPAYMENT_AMOUNT, REDUCE_AMOUNT_PER_INSTALLMENT, REDUCE_NUMBER_OF_INSTALLMENTS, REDUCE_NUMBER_OF_INSTALLMENTS_NEW]
The status of installment after the principal was paid off as part of an over-payment.
Possible values: [PARTIALLY_PAID, PAID, ORIGINAL_TOTAL_EXPECTED_PAID]
principalPaymentSettings object
Defines the principal payment settings constraints for the loans that will be created based on this product.
amount object
Used for keeping decimal constraints.
The default value, will be used in case no other value was filled in by the user.
The maximum value.
The minimum value.
How many repayments the principal has to be paid
If true, the interest will be included along with the principal in the repayment floor amount, for a revolving credit account
percentage object
Used for keeping decimal constraints.
The default value, will be used in case no other value was filled in by the user.
The maximum value.
The minimum value.
The maximum principal due amount a repayment made with this settings can have
The minimum principal due amount a repayment made with this settings can have
The principal payment method
Possible values: [FLAT, OUTSTANDING_PRINCIPAL_PERCENTAGE, PRINCIPAL_PERCENTAGE_LAST_DISB, TOTAL_BALANCE_PERCENTAGE, TOTAL_BALANCE_FLAT, TOTAL_PRINCIPAL_PERCENTAGE]
The minimum total due amount a repayment made with this settings can have
The principal payment method
Possible values: [FLAT, OUTSTANDING_PRINCIPAL_PERCENTAGE, PRINCIPAL_PERCENTAGE_LAST_DISB, TOTAL_BALANCE_PERCENTAGE, TOTAL_BALANCE_FLAT, TOTAL_PRINCIPAL_PERCENTAGE]
A list of basic repayment allocation elements such as the principal, interest & fees.
Possible values: [PRINCIPAL, INTEREST, FEE, PENALTY]
penaltySettings object
Defines the penalty settings for the product that will be used by the loan accounts based on this product
The loan penalty calculation method types
Possible values: [NONE, OVERDUE_BALANCE, OVERDUE_BALANCE_AND_INTEREST, OVERDUE_BALANCE_INTEREST_AND_FEE, MAMBU_FUNCTION_OVERDUE_PRINCIPAL, OUTSTANDING_PRINCIPAL]
Number of days to wait before applying the loan penalty amounts
penaltyRate object
Used for keeping decimal constraints.
The default value, will be used in case no other value was filled in by the user.
The maximum value.
The minimum value.
redrawSettings object
The redraw settings for the product.
Indicates whether the product support redraw (prepayments which are stored at loan account level as a Redrawable balance)
scheduleSettings object
Defines the settings and constraints for schedule for the loans that are created based on this product.
billingCycles object
Defines the billing cycles settings for revolving credit products
If the billing cycle status is enabled or disabled
The billing cycle start days in case it is enabled
Interval Repayment Methodology Settings.
firstRepaymentDueDateOffset object
Decimal integer, like min/max/default.
The default value, will be used in case no other value was filled in by the user.
The maximum value.
The minimum value.
Specifies the days of the month when the repayment due dates should be. Only available if the Repayment Methodology is ScheduleDueDatesMethodDTO#FIXED_DAYS_OF_MONTH.
numInstallments object
Decimal integer, like min/max/default.
The default value, will be used in case no other value was filled in by the user.
The maximum value.
The minimum value.
previewSchedule object
Defines the Preview Schedule settings for revolving products
Preview Schedule status.
The frequency of the loan repayment.
Possible values: [DAYS, WEEKS, MONTHS, YEARS]
The repayment rescheduling method used in calculations.
Possible values: [NONE, NEXT_WORKING_DAY, PREVIOUS_WORKING_DAY, EXTEND_SCHEDULE]
Shows the properties from the repayment schedule that can be edited.
Possible values: [ADJUST_PAYMENT_DATES, ADJUST_PRINCIPAL_PAYMENT_SCHEDULE, ADJUST_INTEREST_PAYMENT_SCHEDULE, ADJUST_FEE_PAYMENT_SCHEDULE, ADJUST_PENALTY_PAYMENT_SCHEDULE, ADJUST_NUMBER_OF_INSTALLMENTS, ADJUST_PAYMENT_HOLIDAYS]
The method used by the loans to compute the repayment schedule.
Possible values: [NONE, FIXED, DYNAMIC]
roundingSettings object
Defines the rounding settings used in the loan computation.
Repayment currency rounding method
Possible values: [NO_ROUNDING, ROUND_TO_NEAREST_WHOLE_UNIT, ROUND_UP_TO_NEAREST_WHOLE_UNIT]
Rounding options for principal, interest and penalties
Possible values: [NO_ROUNDING, ROUND_ALL, PAYMENT_DUE]
Rounding method for repayment schedule
Possible values: [NO_ROUNDING, ROUND_REMAINDER_INTO_LAST_REPAYMENT, ROUND_PRINCIPAL_AND_INTEREST_REMAINDER_INTO_LAST_REPAYMENT]
The schedule due dates method. Used by the loan accounts to determine the due dates of the repayments.
Possible values: [INTERVAL, FIXED_DAYS_OF_MONTH]
The short month handling method type for a loan account.
Possible values: [LAST_DAY_IN_MONTH, FIRST_DAY_OF_NEXT_MONTH]
securitySettings object
The settings and constraints for securities.
Shows whether collateral (assets or other goods) are accepted in order to reach required securities percentage from loan amount, as defined in this product.
Shows whether guarantors (other clients) are accepted in order to reach the required securities percentage from loan amount, as defined in this product.
The securities percentage from loan amount that is needed in order for this account to be approved. Null if the securities are not required.
Shows the possible states of a product
Possible values: [ACTIVE, INACTIVE]
taxSettings object
Tax settings, defines some settings for taxes on the loan product
Shows whether the tax is added on top of the target amount or not.
Possible values: [INCLUSIVE, EXCLUSIVE]
tax source id.
Shows whether taxes on fees are enabled for this product or not.
Shows whether taxes on interest are enabled for this product or not.
Shows whether taxes on penalties are enabled for this product or not.
Shows the possible loan product types
Possible values: [FIXED_TERM_LOAN, DYNAMIC_TERM_LOAN, INTEREST_FREE_LOAN, TRANCHED_LOAN, REVOLVING_CREDIT, INTEREST_ONLY_EQUAL_INSTALLMENTS, DYNAMIC_MORTGAGE]
{
"loanProducts": [
{
"accountLinkSettings": {
"enabled": true,
"linkableDepositProductId": "string",
"linkedAccountOptions": [
"AUTO_LINK_ACCOUNTS"
],
"settlementMethod": "FULL_DUE_AMOUNTS"
},
"accountingSettings": {
"accountingMethod": "NONE",
"accountingRules": [
{
"financialResource": "PORTFOLIO_CONTROL",
"glAccountCode": "string",
"transactionChannelId": "string"
}
],
"interestAccrualCalculation": "NONE",
"interestAccruedAccountingMethod": "NONE"
},
"allowCustomRepaymentAllocation": true,
"arrearsSettings": {
"dateCalculationMethod": "ACCOUNT_FIRST_WENT_TO_ARREARS",
"monthlyToleranceDay": 0,
"nonWorkingDaysMethod": "INCLUDED",
"toleranceCalculationMethod": "ARREARS_TOLERANCE_PERIOD",
"toleranceFloorAmount": 0,
"tolerancePercentageOfOutstandingPrincipal": {
"defaultValue": 0,
"maxValue": 0,
"minValue": 0
},
"tolerancePeriod": {
"defaultValue": 0,
"maxValue": 0,
"minValue": 0
}
},
"availabilitySettings": {
"availableFor": [
"INDIVIDUALS"
],
"branchSettings": {
"allBranches": true,
"branches": [
"string"
]
}
},
"category": "PERSONAL_LENDING",
"creditArrangementSettings": {
"creditArrangementRequirement": "OPTIONAL"
},
"currency": {
"code": "AED"
},
"feeSettings": {
"allowArbitraryFees": true,
"fees": [
{
"accountingRules": [
{
"financialResource": "PORTFOLIO_CONTROL",
"glAccountCode": "string",
"transactionChannelId": "string"
}
],
"amortizationSettings": {
"amortizationProfile": "NONE",
"amortizationRescheduleConfiguration": "END_AMORTIZATION_ON_THE_ORIGINAL_ACCOUNT",
"frequency": "ACCOUNT_INSTALLMENTS_DUE_DATES",
"intervalCount": 0,
"intervalType": "PREDEFINED_INTERVALS",
"periodCount": 0,
"periodUnit": "DAYS"
},
"amount": 0,
"amountCalculationFunctionName": "string",
"amountCalculationMethod": "FLAT",
"feeApplication": "REQUIRED",
"id": "string",
"name": "string",
"percentageAmount": 0,
"state": "ACTIVE",
"taxSettings": {
"taxableCalculationMethod": "DEFAULT"
},
"trigger": "MANUAL"
}
]
},
"fundingSettings": {
"enabled": true,
"funderInterestCommission": {
"defaultValue": 0,
"maxValue": 0,
"minValue": 0
},
"funderInterestCommissionAllocationType": "PERCENTAGE_OF_LOAN_FUNDING",
"lockFundsAtApproval": true,
"organizationInterestCommission": {
"defaultValue": 0,
"maxValue": 0,
"minValue": 0
},
"requiredFunds": 0
},
"gracePeriodSettings": {
"gracePeriod": {
"defaultValue": 0,
"encodedKey": "string",
"maxValue": 0,
"minValue": 0
},
"gracePeriodType": "NONE"
},
"id": "string",
"interestSettings": {
"accrueLateInterest": true,
"compoundingFrequency": "DAILY",
"daysInYear": "ACTUAL_365_FIXED",
"decoupleInterestFromArrears": true,
"indexRateSettings": {
"accrueInterestAfterMaturity": true,
"allowNegativeInterestRate": true,
"indexSourceId": "string",
"interestChargeFrequency": "ANNUALIZED",
"interestChargeFrequencyCount": 0,
"interestRate": {
"defaultValue": 0,
"maxValue": 0,
"minValue": 0
},
"interestRateCeilingValue": 0,
"interestRateFloorValue": 0,
"interestRateReviewCount": 0,
"interestRateReviewUnit": "DAYS",
"interestRateSource": "FIXED_INTEREST_RATE",
"interestRateTerms": "FIXED",
"interestRateTiers": [
{
"endingBalance": 0,
"interestRate": 0
}
]
},
"interestApplicationMethod": "AFTER_DISBURSEMENT",
"interestBalanceCalculationMethod": "ONLY_PRINCIPAL",
"interestCalculationMethod": "FLAT",
"interestRateSettings": [
{
"indexSourceId": "string",
"interestRate": {
"defaultValue": 0,
"maxValue": 0,
"minValue": 0
},
"interestRateCeilingValue": 0,
"interestRateFloorValue": 0,
"interestRateReviewCount": 0,
"interestRateReviewUnit": "DAYS",
"interestRateSource": "FIXED_INTEREST_RATE"
}
],
"interestType": "SIMPLE_INTEREST",
"pmtAdjustmentThreshold": {
"method": "WORKING_DAYS",
"numberOfDays": 0
},
"scheduleInterestDaysCountMethod": "REPAYMENT_PERIODICITY"
},
"internalControls": {
"dormancyPeriodDays": 0,
"fourEyesPrinciple": {
"activeForLoanApproval": true
},
"lockSettings": {
"cappingConstraintType": "SOFT_CAP",
"cappingMethod": "OUTSTANDING_PRINCIPAL_PERCENTAGE",
"cappingPercentage": 0,
"lockPeriodDays": 0
}
},
"loanAmountSettings": {
"loanAmount": {
"defaultValue": 0,
"maxValue": 0,
"minValue": 0
},
"trancheSettings": {
"maxNumberOfTranches": 0
}
},
"name": "string",
"newAccountSettings": {
"accountInitialState": "PARTIAL_APPLICATION",
"idGeneratorType": "INCREMENTAL_NUMBER",
"idPattern": "string"
},
"notes": "string",
"offsetSettings": {
"allowOffset": true
},
"paymentSettings": {
"amortizationMethod": "STANDARD_PAYMENTS",
"latePaymentsRecalculationMethod": "OVERDUE_INSTALLMENTS_INCREASE",
"paymentMethod": "HORIZONTAL",
"prepaymentSettings": {
"applyInterestOnPrepaymentMethod": "AUTOMATIC",
"elementsRecalculationMethod": "PRINCIPAL_EXPECTED_FIXED",
"ercFreeAllowance": 0,
"futurePaymentsAcceptance": "NO_FUTURE_PAYMENTS",
"prepaymentAcceptance": "ACCEPT_PREPAYMENTS",
"prepaymentRecalculationMethod": "NO_RECALCULATION",
"principalPaidInstallmentStatus": "PARTIALLY_PAID"
},
"principalPaymentSettings": {
"amount": {
"defaultValue": 0,
"maxValue": 0,
"minValue": 0
},
"defaultPrincipalRepaymentInterval": 0,
"includeFeesInFloorAmount": true,
"percentage": {
"defaultValue": 0,
"maxValue": 0,
"minValue": 0
},
"principalCeilingValue": 0,
"principalFloorValue": 0,
"principalPaymentMethod": "FLAT",
"totalDueAmountFloor": 0,
"totalDuePayment": "FLAT"
},
"repaymentAllocationOrder": [
"PRINCIPAL"
]
},
"penaltySettings": {
"loanPenaltyCalculationMethod": "NONE",
"loanPenaltyGracePeriod": 0,
"penaltyRate": {
"defaultValue": 0,
"maxValue": 0,
"minValue": 0
}
},
"redrawSettings": {
"allowRedraw": true
},
"scheduleSettings": {
"billingCycles": {
"enabled": true,
"startDays": [
0
]
},
"defaultRepaymentPeriodCount": 0,
"firstRepaymentDueDateOffset": {
"defaultValue": 0,
"maxValue": 0,
"minValue": 0
},
"fixedDaysOfMonth": [
0
],
"numInstallments": {
"defaultValue": 0,
"maxValue": 0,
"minValue": 0
},
"previewSchedule": {
"numberOfPreviewedInstalments": 0,
"previewScheduleEnabled": true
},
"repaymentPeriodUnit": "DAYS",
"repaymentReschedulingMethod": "NONE",
"repaymentScheduleEditOptions": [
"ADJUST_PAYMENT_DATES"
],
"repaymentScheduleMethod": "NONE",
"roundingSettings": {
"repaymentCurrencyRounding": "NO_ROUNDING",
"repaymentElementsRoundingMethod": "NO_ROUNDING",
"roundingRepaymentScheduleMethod": "NO_ROUNDING"
},
"scheduleDueDatesMethod": "INTERVAL",
"shortMonthHandlingMethod": "LAST_DAY_IN_MONTH"
},
"securitySettings": {
"isCollateralEnabled": true,
"isGuarantorsEnabled": true,
"requiredGuaranties": 0
},
"state": "ACTIVE",
"taxSettings": {
"taxCalculationMethod": "INCLUSIVE",
"taxSourceId": "string",
"taxesOnFeesEnabled": true,
"taxesOnInterestEnabled": true,
"taxesOnPenaltyEnabled": true
},
"type": "FIXED_TERM_LOAN"
}
]
}